1 1/2″ Deluxe Insert Glide
Fits an 1 1/2″ Inside Diameter
Metal Weld Cup (part #30-408) (for Wrought Iron)
Black

• – 1 1/2″ Deluxe Insert Glide
• – Fits a 1 1/2″ Inside Diameter Metal Weld Cup (part #30-408) (for Wrought Iron)
• – Height: 11/16″
• – Protects your patio surface and patio chair feet from scratching and damage. Provides a smoother movement of furniture, allowing patio furniture to slide over the surface of your patio.
• – The best way to insert the 30-612b is to make sure the old insert is completely out of the weld cup. If there is a plastic ring inside the metal weld cup it is most likely the edge of the old glide. Put the insert on the floor. Place the metal weld cup over the part centering it in the cup. Push down on the chair with the leg going straight down onto the part. The sides of the insert have very fine ridges that will peal as the part fits tightly into the weld cup. If the metal weld cup is worn or rusted because the furniture was used without glides you may have to file the inner edge of the metal weld cup or replace the metal weld cup.
• – Click dimensions on the right for more information
• – See illustration for reference
• – Color: Black