Description: 1 1/2″ Inside Diameter Steel Cup for Replacing Wrought Iron Welded Foot Center hole is 3/8″ diameter (Parts #30-612, #30-612B and #30-614 fit into this metal weld cup.)

The 30-408 – 1 1/2″ I.D. Steel Weld Cups are unfinished and may have surface rust when you receive them. These parts are made to be welded to the legs of wrought iron furniture. They cannot be zinc plated, anodized, galvanized or metalized because those finishes will cause harmful fumes for the welder. It is impossible to completely stop unfinished steel parts from rusting on the surface. The 30-408 parts are coated with oil to help reduce the amount of oxidation that causes rust. They should be degreased by cleaning with soap and hot water before they are welded or painted. The welding will cause the part to burn so you will need to clean the welded foot after the welding by sanding, wire wheel polishing or sand blasting before they are prepared for paint.

• – Steel Weld Cup is a replacement weld cup for wrought iron patio chair leg
• – These parts are made to be welded to the legs of wrought iron furniture.
• – Once installed, 30-614, 30-612 and 30-612B plastic insert cups fit into the steel weld cup to let the furniture slide
• – 1 1/2″ Inside Diameter
• – Center hole is 3/8″ diameter
• – See above for further preparation and installation instructions
• – Once installed, the following inserts fit inside the cup (sold separately):
• – steel weld cup replaces a foot welded onto wrought iron patio furniture

30-614 – 1 1/2″ Round Plastic Insert Cup
30-612 – 1 1/2″ Deluxe Insert Cup (White) and
30-612B – 1 1/2″ Deluxe Insert Cup (Black)
fit into 30-408 – 1 1/2″ I.D. Steel Weld Cup